UF membrane element size
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
Disclaimer
Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of microorganisms in the system.
Partial OEM model parameters of SINOMEMB ® UF membrane
| UF specifications and models | Membrane material | Operation mode | Membrane element size (mm) | Effective membrane area (㎡) | Nominal filter pore size (μm) |
| SNU-HO-2-D1020AN | PVDF | outside-in | Φ216×1120 | 29 | 0.01 |
| SNU-HO-2-SP40 | PVDF | outside-in | Φ160×1804 | 40 | 0.03 |
Note: The element model (membrane performance, appearance size) not mentioned can be customized according to the order quantity.
| Model | | | | | | |
| Effective area(m2) | 30 | 20 | 20 | 15 | 12.5 | 10 |
| Size: H*L*W(mm) | 2000*535*46 | 2000*535*46 | 1500*535*46 | 1500*535*46 | 1000*535*46 | 1000*535*46 |
| Pore Size (um) | 0.03 | 0.2 | 0.03 | 0.2 | 0.03 | 0.2 |
| Fiber Diameter (mm) | 2.0土0.025 | 2.5土0.025 | 2.0土0.025 | 2.0土0.025 | 2.0 + 0.025 | 2.5 + 0.025 |
| Flux rate (L/m2.hr) | 10~30 |
| Membrane Material | Reinforced PVDF + ABS |
| Connector Material | ABS |
| Fiber Tensile (N) | 200 |
| Bubble Point (Mpa) | >0.05 |
Specification List II MBR membrane has stainless steel tubes on each side. They act as the membrane's supporting material and water collection pipes. Compared with other styles of the MBR Membrane, Water Master is easier, more convenient to assemble on the cassette, and easier to disassemble for further maintenance and replacement. It is the ideal choice for bigger projects.
| Model | SP-MBR-Il-40 | SP-MBR-Il-25 | SP-MBR-II-20 | SP-MBR-I-15 | SP-MBR-II-06SP-MBR-Il-10 | |
| Effective area(m2) | 30 | 20 | 20 | 15 | 12.5 | 10 |
| 2000*1250*30Size: H*L*W(mm) | 2000*535*46 | 1500*1250*30 | 1500*535*46 | 1500*535*46 | 1000*535*46 | 1000*535*46 |
| Pore Size (um) | 0.03 | 0.2 | 0.03 | 0.2 | 0.03 | 0.2 |
| Fiber Diameter (mm) | 2.0土0.025 | 2.5土0.025 | 2.0土0.025 | 2.0土0.025 | 2.0 + 0.025 | 2.5 + 0.025 |
| Flux rate (L/m2.hr) | 10~30 |
| Membrane Material | Reinforced PVDF + ABS |
| Connector Material | ABS |
| Fiber Tensile (N) | 200 |
| Bubble Point (Mpa) | >0.05 |
Company information
We are a high-tech enterprise specializing in reverse osmosis membrane,
ultrafiltration membrane, nanofiltration and MBR membrane assembly,
membrane production and sales service, and also a system design and
proprietary service provider.
The company has the core technology of preparing reverse osmosis
membrane components, and has high production capacity, aiming tobuild
a high-quality brand of film production and sales inChina.
Main products include reverse osmosis membrane
components,nanofiltration membrane components, ultrafiltration
membrane components, MBR membrane and other high- performance
membrane components, which have been widely used in water
purification, medical pharmaceuticals, municipal water supply, boiler
replenishment, electronic ultra- pure water, material concentration and
separation industries. With outstanding quality and excellent service, our
products export to all over the world
Product Tags:
|
|
0.01mm Pore PVDF Hollow Fiber Membrane 29M2 Surface Area For Water Treatment Systems Images
|
