PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment

The Canpure curtain type membrane module adopts a full-open design to prevent polluting dead angles

and is obviously advantageous in large-scale systems with the strengths such as strong adaptability to

membrane water, high packing density and small floor space.

Complex Thermally Induced Phase Separation (c-TIPS) PVDF UF Membrane

/patented technology/

Canpure PVDF membrane is made by Canpure’ s patented c-TIPS technology. It has capillary strength

higher than PVDF membrane prepared by NIPS Method and much better filtration grade than PVDF

membrane prepared by conventional TIPS Method.

Permanent Hydrophilic Property / patented technology /

During the preparation of Canpure PVDF membrane, hydrophilic substances are added and special cross-

linking technique is applied, endowing the permanent hydrophilic property of the capillary, more stable

product water flux, improved anti-fouling property and better cleaning recovery.

High Anti-oxidation Performance

Canpure PVDF membrane has high crystallinity, can tolerate oxidant with higher concentration, and thus

can achieve more profound cleaning effect and longer life.

Double-end Water Production

Permeate water is produced from both the lower and upper ends in Canpure Membrane Modules. This

offers larger flux and more even distribution of fouling load than traditional single-end water production

mode, and also effectively reduces the TMP and prolongs the operation cycle.

Soft Potting /patented technology/

The soft potting technique initiated by Canpure realizes the flexible connection between the “root” of the

capillaries and the soft layer of the potting material, and prevents the break of the root of the capillaries.